Automatic Inflatable Camping Mattress – Moisture-Proof,Back-Support,Portable|Traverseon

Self-Inflating Foam Mattress Needs No Electric Pump, 5 cm Support Stays Stable Through the Night

Open the valve and lay the mattress flat—the PU rebound foam expands on its own and draws in air while you pitch the tent, unpack sleeping bags, or organize other gear. No electric pump, batteries, or separate inflator are needed. If you prefer a firmer sleeping surface after the mattress has expanded, simply add a few breaths; release a little air for a softer feel. The 5 cm (1.97 in) PU foam core cushions the shoulders, waist, and hips from hard or slightly uneven tent floors. Unlike a traditional air mattress that relies mainly on air pressure for support, the foam-supported structure continues to provide cushioning even if air pressure changes, helping avoid the noticeable overnight softening and sagging commonly associated with air beds.

The durable outer surface and five-layer construction are made for repeated rolling, tent-floor contact, and everyday camping use, helping resist ordinary scratches and wear while separating your sleeping area from ground moisture. R-Value 9.5 insulation helps reduce heat loss to cold tent or vehicle floors, while the built-in adjustable pillow eliminates the need to carry a separate camping pillow. The Single measures 192 × 67 × 5 cm (75.6 × 26.4 × 1.97 in) and weighs 1.2 kg (2.65 lb); the Double measures 192 × 132 × 5 cm (75.6 × 52.0 × 1.97 in) and weighs 2.56 kg (5.64 lb). Available in Olive Green and Khaki, the mattress rolls down to approximately 16 × 68 cm (6.3 × 26.8 in) and fits into the included water-resistant compression bag, leaving more trunk or RV storage space for tents, sleeping bags, coolers, and other camping gear. The built-in snap-button connection design allows multiple mattresses of the same model to connect together, including Single-to-Single, Double-to-Double, and Single-to-Double combinations, making it easy to create a larger sleeping area when needed. Suitable for tent camping, car camping, drive-up campsites, road trips, vanlife, camping cots, children’s sleepovers, guest beds, and emergency sleeping.

• Self-Inflates After Opening the Valve, No Electric Pump to Carry
  Open the valve and lay the mattress flat—the PU foam expands on its own and draws in air while you pitch the tent or organize other gear. No electric pump, batteries, or separate inflator are needed. If you prefer a firmer sleeping surface after it expands, simply add a few breaths.
• Foam Keeps Supporting Your Body, Less Overnight Softening and Sagging
  Traditional air mattresses rely mainly on air pressure, so air loss can leave them noticeably softer or sagging overnight. This mattress combines air with supportive PU foam, so the foam continues cushioning your body even when air pressure changes, reducing the deflated-bed feeling common with traditional air beds.
• 5 cm (1.97 in) Cushioning, Hard Uneven Ground Feels Less Harsh
  The 5 cm (1.97 in) PU rebound foam creates continuous cushioning beneath your shoulders, waist, hips, and legs. It reduces how much you feel hard spots and slight unevenness beneath the tent floor, making both back and side sleeping more comfortable than on a basic thin mat.
• Tough Five-Layer Build, Less Worry About Scratches and Daily Wear
  The five-layer construction combines a durable outer surface, PU foam, an airtight PVC layer, and a non-slip base. It handles repeated rolling, regular tent-floor friction, and ordinary scratches from camping and travel, making it better suited to frequent outdoor use.
• Firmness Adjusts to Your Preference, More Comfortable for Back or Side Sleepers
  Add a little air when you want a firmer sleeping surface, or release some for a softer feel. Back sleepers can get steadier support beneath the waist and hips, while side sleepers can leave more cushioning around the shoulders and hips.
• R-Value 9.5 Ground Insulation, Sleep Warmer Above Cold Ground
  The R-Value 9.5 insulation helps reduce body-heat loss to cold tent or vehicle floors. It adds useful separation from chilly ground during early-spring trips, fall camping, cold mornings, and lower-temperature overnight stays.
• Built-In Adjustable Pillow, One Less Item to Pack for Camp
  The integrated air pillow supports the head and neck without requiring a separate camping pillow. Add or release air to adjust the pillow height for your sleeping position, while the attached design helps keep it from sliding away during the night.
• Foam-and-Air Support, Less Wobble and Noise When You Turn
  The foam core absorbs part of the movement created when you turn or change sleeping positions. It reduces the bouncing, internal air shifting, and plastic rubbing sounds common with pure air pads, helping couples, light sleepers, and families with children rest with fewer disturbances.
• Grippy Moisture-Resistant Base, Less Sliding and Dampness Underneath
  The textured base helps keep the mattress from sliding when you turn during the night. Its moisture-resistant construction also helps separate the sleeping surface from ordinary ground dampness, dust, and vehicle-floor contact during camping or travel.
• Single or Double Sleeping Space, More Comfortable for Solo or Shared Sleep
  The Single measures 192 × 67 × 5 cm (75.6 × 26.4 × 1.97 in) and weighs 1.2 kg (2.65 lb) for solo sleeping. The Double measures 192 × 132 × 5 cm (75.6 × 52.0 × 1.97 in) and weighs 2.56 kg (5.64 lb), giving couples or parent-child campers one continuous sleeping surface instead of two separate pads.
• Snap-Button Connection Design, Expand Your Sleeping Space Anytime
  The built-in snap-button design allows multiple mattresses of the same model to connect together. Single-to-Single, Double-to-Double, and Single-to-Double combinations are supported, making it easy to create a larger sleeping area for couples, families, or group camping.
• Packs Down to 16 × 68 cm (6.3 × 26.8 in), Leaves More Room for Gear
  The wide release valve lets air escape faster during pack-up, reducing repeated squeezing and rolling. The mattress packs down to approximately 16 × 68 cm (6.3 × 26.8 in) and fits into the included water-resistant compression bag, leaving more vehicle or RV storage space for tents, sleeping bags, coolers, and other camping gear.
• Works in Tents, Cars and Guest Rooms, One Pad Covers More Overnight Needs
  Use it for tent camping, car camping, drive-up campsites, road trips, vanlife, camping cots, children’s sleepovers, temporary guest beds, and emergency sleeping. The self-inflating design makes it practical anywhere you need an extra sleeping surface without bringing an electric pump.

Material Composition
Polyester fabric surface + PU rebound foam + PVC airtight lining + Anti-slip bottom
Structure
5-layer composite structure
Thickness
5 cm
Inflation Method
Self-inflating (approximately 75% automatic, manual top-up optional)
Pillow Type
Built-in adjustable air pillow
Available Sizes
Single: 192 × 67 cm
Double: 192 × 132 cm
Packed Size
16*68cm
Weight
Single: 1.2 kg
Double: 2.56 kg
Triple: 3.4 kg
Carry Bag
Included: Water-resistant compression sack with drawstring & handle
Color Options
Olive Green/Khaki
Features
One-piece design (no zippers), non-slip base, durable and moisture-resistant materials, ergonomic design for sleep support
Storage Method
Roll-up with compression sack
Target User Groups
Adults, families, couples, children, side sleepers
Recommended For
Camping, backpacking, road trips, vanlife, guest mattress, kids sleepovers